V1.0
100 pc Air Tool Kit
8844151
Visit www.princessauto.com for more information
17
4.1 If the tool stalls while tightening, do not raise the output pressure
of the air compressor above 90 PSI. Pressure above 90 PSI will
strip the workpiece and damage the tool, potentially causing tool
failure and serious injury. Use other appropriate methods and
tools to tighten the nut.
5. This tool will stop operation/rotation a few seconds after the trigger
is released.
6. When the fastener is tightened, release the trigger and remove the
tool and socket.
7. Use a mechanical torque wrench to check the fastener’s torque.
8. Shut the compressor off once the task is completed. Squeeze the
trigger to release residual compressed air from the hose and tool.
Disconnect the tool.
PARTS BREAKDOWN
