PRONAR T683, Operator'S Manual

Page: 135 / 147

SECTION 5 Pronar T683
5.33
5.7 CONSUMABLES
5.7.1 HYDRAULIC OIL
During trailer use the user is obliged to observe lubrication instructions according to
attached lubrication schedule.
Always adhere to the principle that the oil in the trailer hydraulic system and in the tractor
hydraulic system are of the same type. In the event of application of different types of oil
make certain that both hydraulic substances may be mixed together. Application of different
oil types may cause damage to trailer or tractor. In a new machine, the hydraulic system is
filled with L HL32 Lotos hydraulic oil.
TABLE 5.3 L-HL 32 Lotos hydraulic oil characteristics
ITEM NAME UNIT VALUE
1 ISO 3448VG viscosity classification - 32
2 Kinematic viscosity at 40°C mm
2
/s 28.8 – 35.2
3 ISO 6743/99 quality classification - HL
4 DIN 51502 quality classification - HL
5 Flash-point C 230
In the event of necessity of changing hydraulic oil for another oil, check the recommendations
of the oil Manufacturer very carefully. If it is recommended to flush the system with the
appropriate preparation, then comply with these recommendations. Attention should be
given, so that chemical substances used for this purpose do not damage the materials of the
hydraulic system. During normal trailer use change of hydraulic oil is not necessary, but if
required, this operation should be entrusted to a specialist service point.
Because of its composition the oil applied is not classified as a dangerous substance,
however long-term action on the skin or eyes may cause irritation. In the event of contact of
oil with skin wash the place of contact with water and soap. Do NOT apply organic solvents
(petrol, kerosene). Contaminated clothing should be changed to prevent access of oil to skin.
In the event of contact of oil with eye, rinse with large quantity of water and in the event of the