SECTION 4
Pronar T683
4.11
Disconnecting the second trailer
Immobilise tractor and trailers with parking brake.
Turn off tractor engine. Ensure that unauthorised persons do not have access
to the tractor cab.
Disconnect conduits of pneumatic, hydraulic and electrical systems according
to instructions contained in section (4.2)
Unlock the pin of the hitch of the first trailer. Remove the pin and drive tractor
away.
DANGER
The person assisting in coupling the second trailer must stand in such a place as to be
visible to the tractor driver at all times. Be especially careful and keep safe distance from
danger zones.
IMPORTANT
Do NOT hitch a second trailer constructed on any chassis except dual axle chassis.
The rear manual hitch is designed only for towing a second trailer whose permissible
gross weight does not exceed 18 000 kg.
4.4
LOADING AND SECURING LOAD
4.4.1 GENERAL INFORMATION ABOUT LOADING
Before loading, make certain that the load box walls and chute slide gate are properly closed
and secured. The trailer must be positioned to travel forwards and hitched to the tractor.
Loading should only take place, when trailer is placed on flat level surface and hitched to
tractor. If the trailer is equipped with tarpaulin cover, it should be rolled. If load does not exert
pressure on the side walls or wall extensions, the linking cable may be disengaged. In other
cases it must be installed between the middle stakes of the load box. The trailer's load box
may be damaged if there is no linking cable.
Regardless of the type of load carried, the user is obliged to secure it in such a manner that
the load is unable to spread and cause contamination of the road. If this is impossible, do
NOT transport this type of load.
Summary of Contents for T683
