PRONAR T683, Operator'S Manual, Page: 53 / 147

SECTION 3 Pronar 683
3.7
FIGURE 3.3 Rear wall slide gate
(1) chute slide gate, (2) chute, (3) lever, (4) locking bolt
In order to enable very precise unloading of loose materials there is a slide opening placed in
the rear wall (1) – figure (3.3), which is raised using lever (3). When in upper position and
also during transport the slide must be secured by tightening the locking screw (4). A chute
for the trailer, secured under the lower edge of the slide opening (2) may be supplied as
additional equipment. Optionally, the trailer can be equipped with rear wall with 2 or 3 chute
dampers. The trailer can be additionally equipped with the system of side chutes (on one side
or on both sides) and the rear chute that enables unloading material outside the area of the
trailer's wheels.
Additional equipment of the trailer includes the feeder unit with hydraulic drive system that
facilitates precise unloading of loose materials.