background image

 

 

 
 
 
 
 
 
 
 
 
 
 

FOOT PEDAL LATCH 

PRODUCT ITEM NUMBER-110537 

DIMENSIONS: L 8”X W 6”X H 3” 

WEIGHT: 2.5lbs. 

MANUAL NUMBER-104828-B 

 

LIMITATION OF LIABILITY

 

NOTICE:

 

Once  used, this  kit  cannot be returned  to  the  store.  If you  have  a warranty  claim,  please  read 

and follow Warranty Information directions below

 

WARRANTY  INFORMATION 

CLAM  OUTDOORS  INC.  warrants  to  the  original  retail  purchaser  its  product  be  free  from  manufacturers 

defects for  (5) years from the date of the original purchase. Clam Outdoors Inc will replace or repair  any  part 
found defective within the (5) years time limit. All parts must be returned to Clam Outdoors Inc. Before returning 
any parts, you must first call or write and acquire a return authorization. All returns must be returned postage-
prepaid and include the original cash register receipt (date and purchase price). 

To submit a warranty claim request, please use one of the following methods:

 



Customer Service Hrs: 9am to 4pm, Monday – Friday Central Standard Time 



Clam Corporation 

Attn: Customer Service – Warranty Department 
12135 Brockton Lane 
Rogers, MN 55369 



Phone: 763-231-4120 



Fax: 763-231-4121 



Email: 

[email protected] 



Website: 

Clamoutdoors.com 

The  warranty  does  not  apply  to  any  Polar  Trailer  accessory  which  has  been  subjected  to  an  accident, 

improper  installation,  modification,  adjustment,  repair,  misuse,  misapplication,  neglect,  including  but  not 
limited to  improper maintenance, or use of unauthorized parts or attachments. 

LIMITATION OF LIABILITY 

It is expressly understood that Clam Outdoors Inc. liability for its products, whether due to breach of warranty, 

negligence,  strict  liability, or  otherwise, is  limited  to  the  repair of  the  product  as  stated  above. Clam  Outdoor 
Inc.  is  not  liable  for  any  injury,  loss,  damage, or  expense,  whether  direct  or  consequential, including  but  not 
limited to loss of use, income, profit, or damage to material arising in connection with the sale, installation, use 
of, inability to use, or the repair or replacement  of  Clam Outdoor Inc. products.  Clam Outdoor Inc. reserves  the 
right  to  make  alterations  or  modifications  in  its  products  at  any  time,  which  in  its  opinion, may  improve  the 
performance and efficiency of the product. It  shall not be obligated to make such alterations or modifications to 
products already in service. 

MODEL ITEM 10537 

Summary of Contents for Polar Trailer 10537








Reviews: