PRONAR PT512, Operator'S Manual

Page: 34 / 139

Pronar PT512 CHAPTER 2
2.8
FIGURE 2.1 Method of placing wheel chocks
(1) wheel chock
•
The wheel chocks (1) must be placed only under one wheel (one in the front of
the wheel, the second behind the wheel
•
Do not leave the trailer unattended. The trailed disconnected from a tractor must
be secured against rolling by means of the parking brake and the wheel chocks or
other objects without sharp edges laid under the wheels of the vehicle.
•
Before moving check that the trailer is correctly hitched to a tractor – in particular
check if the hitching pins are secured properly.
•
Vertical load carried by the trailer drawbar eye affects the steering of a tractor.
•
It is prohibited to drive with the loading case raised.
•
Before driving off check if the pins attaching the loading case to the lower frame
and wall pins are secured against falling out. Check if the rear wall slide gate is
secured properly. Make sure that all walls and extensions are properly closed.
Check if the tensioning wires are attached correctly and if the wire detaching
mechanism is secured.