PRONAR PRONAR PDT260, Operator'S Manual

Page: 90 / 97

Pronar PDT260; PDT260C, PDT300; PDT 300C, PDT340 SECTION 5
5.18
TABLE 5.5 Recommended lubricants
LISTED ON
TAB. (5.4)
DESCRIPTION
A machine general-purpose grease (lithium, alkaline),
B standard machine oil,
Empty grease or oil containers should be disposed of according to the recommendations of
the lubricant Manufacturer.
During mower use the user is obliged to observe lubrication instructions according to
attached lubrication schedule.
5.7 CONSUMABLES
5.7.1 LUBRICANTS
For mower lubrication the application of general purpose machine greases is recommended,
which contain anticorrosion additive and have significant resistance to being washed away by
water.
Before starting to use greases acquaint oneself with the content off the information leaflet for
the chosen product. Particularly relevant are safety rules and handling procedures for given
lubricant product and waste utilisation (used containers, contaminated rags etc.). Information
leaflet (material safety data sheet) should be kept together with grease.
5.8 TIGHTENING TORQUE FOR NUT AND BOLT
CONNECTIONS
Unless other tightening parameters are given, during maintenance repair work apply
appropriate torque to tightening nut and bolt connections. Recommended tightening torque of
most frequently applied nut and bolt connections are given in table below. Given values apply
to non-lubricated steel bolts.