PRONAR PRONAR PDT260, Operator'S Manual

Page: 76 / 97

Pronar PDT260; PDT260C, PDT300; PDT 300C, PDT340 SECTION 5
5.4
FIG. 5.2 Knife types depending on cutting disc rotation direction
(A) right blades; (B) left blades
Due to different cutting disc rotation direction, cutter bar (figure 5.2) is equipped with the right
blades (A) and left blades (B). Rotation direction is indicated on the knife.
ATTENTION!
Each time a knife hits an obstacle such as a stone or a branch, its technical condition
must be inspected.
5.1.2 INSPECTION AND REPLACEMENT SWATH CONDITIONER FLAIL
BLADES (PDT260C, PDT300C)
Regularly inspect beater fingers. Visually inspect beater fingers, their mountings and rubber
blocks. Worn rubber blocks, distorted or broken fingers should be replaced. Fingers should
be replaced in pairs to maintain balance.