PRONAR PRONAR PDT260, Operator'S Manual

Page: 14 / 97

Pronar PDT260; PDT260C, PDT300; PDT 300C, PDT340 SECTION 1
1.4
Unauthorised repairs and modifications of the machine without prior consent of the
Manufacturer will be regarded as use contrary to the intended purpose. The machine may
only be used by appropriately trained users, who are aware of the dangers, design and
operation of the machine. Repairs to the machine shall only be made by qualified personnel
(in the warranty period all repairs must be performed in the warranty service, indicated by the
Manufacturer). Maintenance and repairs that can be performed by the user, are described in
section 5 „MAINTENANCE”.
TABLE 1.2 Agricultural tractor's requirements
UNIT REQUIREMENTS
Linkage
Rear three point linkage - Category II and III according to ISO
730
Power take-off shaft
PDT 260 PTO speed RPM 540
PDT 300 PTO speed RPM 1,000
PDT 340 PTO speed RPM 1,000
Number of splines on PTO shaft item 6
PTO rotation direction - clockwise
Hydraulic system
Nominal pressure MPa 16
Hydraulic oil - HL32
Hydraulic sockets - 3 sockets on the rear of tractor
Other requirements
Minimum power
PDT260
PDT260C
kW /
Horsepower
33 / 45
44 / 60
PDT300
PDT300C
kW /
Horsepower
44 / 60
55 / 75