2
General information and operating concept
Display background lighting
To ensure easy monitoring of the UV system ope‐
ration, the background lighting of the display
changes according to the UV system operating
status.
–
Normal operation: green lighting
–
Warning: yellow lighting
–
Fault: red lighting
A1169
06/12/2012
10:06:53
START
FAULTS
MENU
UNIT OFF
WIPER
Unit ready for start
Fig. 1: Status [UNIT OFF]
In operation, as well as in the
[UNIT OFF] status, you can change
to the
[menu] by pressing [F5]. The [menu] contains additional
information about statuses, settings and system history.
Alongside this information, the menu area is also used to adjust the
control.
If no key is pressed for 5 minutes, then the UV system automati‐
cally exits the
[menu] and the standard display for the current oper‐
ating status is displayed.
The
[menu] is set to the corresponding operating statuses, that is
to say when the UV system is running, all events are monitored
and treated accordingly to the operating status, but are not dis‐
played. If, due to events, the control changes to one of the statuses
[POST-BURNING], [PAUSE],[RINSE] or [FAULT] the system exits
the
[menu] and the display corresponding to the operating status
appears.
The function keys F1 ... F10
Essentially the arrow keys and the [TAB] key can
be used as an alternative to the function keys
[F1] ... [F10]. These operating instructions describe
operation of the system using the function keys
[F1] ... [F10] as a matter of course. Use of the
arrow keys and the [TAB] key is only described
where this is unavoidable.
This approach should improve the legibility and
ease of understanding of the operating instruc‐
tions.
General information
The operating concept
General information and operating concept
6
