7.2 Radiation chamber
7
16
8
9
7
17
6
9
9
9
2
1
12
12
5
5
A1443
10
18
Fig. 49: Construction of the radiation chamber
1. Motor
2. Protective cover
5. Outlet
6. Wiper rod
7. Air vent/Drain/Flushing connection with O-ring
(depending on the fitting position)
8. UV sensor
9. O-ring
10. Lamp protection tube
12. Inlet
16. Temperature switch
17. Support plate for UV lamp protection tube
18. Safety switch
7.2.1 Assembly
Maintenance work
Leave adequate room for maintenance work
The clearance required can be found in the
enclosed dimensions sheet.
Fix the radiation chamber in place with appropriate fixing material
(pipe clamp, frame). The installation location can in principle be
chosen at random and, if required, can be adapted to conditions on
site.
Location
Assembly and installation
53
