6.5.2.2
[Wiper control - time interval, manual control]
You can set the wiper interval in this menu.
A1436
MENU
Wiper Controls
Hours
Wiper interval:
5
HOME
MANUAL
WIPER
Wiper is calibrated!
Fig. 29: [Wiper control - time interval, manual control]
1.
Use the
[TAB] key to select the number of hours
2.
Now press
[ENTER].
ð
The message
[Function keys are deactivated] now
appears; you can now enter the required number of
hours using key values 0 ... 9.
3.
Enter a single-digit figure for the number of hours of between
0 ... 9 hours
4.
Confirm the value by pressing
[ENTER]
5.
Now press the F5
[MENU] key
ð
The entered value is saved and the display again shows
the selection of the second operating and display level
Use
[F3] to switch between [AUTO] and [MANUAL]
[MANUAL] sets the position of the wiper, the maximum wiping
length and the home position (black circle at home). The travel of
the wiping movement is linked to the size of the system and is
automatically selected with the configuration. Manual operation is
only possible in
‘Off’ or ‘Pause’ status, otherwise the wiper could
affect the UV sensor signal if the wiper is in a position above the
UV lamp or the wiper could be damaged. For this reason, the dis‐
play is backlit in yellow. The wiper is activated by pressing and
holding down the keys for
[Forward] and [Back].
Auto / Manual
Control
39
