AMMONIA User Manual
AMMONIA_User 9/09
48
5.1 Passwords
After you’ve turned ON passwords and
logged in as one of the eight users:
To modify your
Keypad Password
press
ENTER
and
UP
to
Passwords
at the power up or day-time display.
Key
ENTER
@
Passwords
.
To
Logout
as the current user,
key
ENTER
at
Logout
.
The Analyzer automatically logs you out
30 minutes after your last key press.
Note that this display shows
Operator1,
your user ID.
Key
ENTER
at
Reset Pswrds
.
to key in the reset code which returns
all passwords to default.
Key
ENTER
at
Edit Passwords
to view or modify your password.
Key
UP
or
DOWN
to change the underlined letter or digit.
Key
RIGHT
to move the underline.
Press
ENTER
to change your password
or EXIT to leave unchanged.
In this example we changed
Operator1
’s
default password from ‘
1
’ to
OP1
.
Modify Password
Thu 16:54:10
S/N: A076X0486
Passwords
Diagnostic
Reset Pswrds
Yes
Logout
Operator1
then
Editing, or Exit
OP1
Edit Passwords
Yes
then
Sidebar:
Modify Passwords:
Because all 8 default passwords are listed on the previous page.
You’ll should modify all 8 passwords when you initially turn ON passwords.
Passwords are limited to 8 capital letters and numbers.
Any space in a password ends the password on both editing and
Login
password entry
Two users cannot share the same password because the password is used to identify the user.
The Analyzer displays
Password Fail
on a duplicate password.
Reset Passwords:
If you forget your password, a
Reset Password
is available from Aquatrac &
specific to your Analyzer’s serial number that sets all passwords to default.
Passwords
: This menu item only displays on Analyzers that have turned ON
Keypad Password
.