AMMONIA User Manual
AMMONIA_User 9/09
3
4
2.4 Sensor Configure
To
Disable
a sensor, key
UP
or
DOWN
to the target sensor
and press
ENTER
.
Key
DOWN
and
ENTER
@
Configure
.
Key
DOWN
to view
Disable Input
.
Press
ENTER
to
Disable
.
The Analyzer removes the sensor from the
display
UP
-
DOWN
sequence and reorders the display.
OR
If the sensor is in use for control, used to compensate
another sensor or used for inventory or manual entry, it will
NOT be disabled & you’ll see this display.
Key
EXIT
.
pH
7.3
Configure
Diagnostic
Disable Input
Yes
C
Disabling Sensors
and
NH3
1.30 ppm
and
pH
In use,error
or
D
Sidebar:
Disabling a sensor removes it from the display and all selection menus used. Data logging stops
for disabled sensors.
Refer to
Enabling Inputs & Outputs
if you need to re-enable a disabled sensor.
Use Disable Input to unclutter the display, reducing scrolling key presses.