AMMONIA User Manual
AMMONIA_User 9/09
2
2
Users may use the Analyzer to key in results of chemical
tests. These results may be used to alarm, The result of a
drop test is entered, logged and displayed on control input ‘
J
’
Input ‘
S
’ is the default flowswitch input for the
sample header sensor flow.
You can edit the name of any input or output.
You can disable unused sensors, pumps or relays
to un-clutter the display and turn them
back ON as site needs change.
Plug-in a new sensor card and the
Analyzer auto reconfigures
Key
EXIT
anytime on the
Main Menu
& you’ll get
back to this power ON display
Total Ammonia
0.0 ppm
Test_NH3_J
0.0 ppm
Test_CL_K
0.0 ppm
Test_pH_I
7.8 pH
FlowSwitch_S
Flow
Thu 16:54:10
S/N: A076X0486
Sidebar:
Sensor alarms will re-trip after the user set ‘Delay’ unless the fault is corrected. Relays
controlled by sensors power devices ON and OFF. (Relays are outputs 1 to 5).