Heat setting
Length of the automatic warm up [min:sec]
2:00
2:30
2:50
---
Locking/unlocking the control panel
The control panel, with the exception of the
“On/Off” sensor field, can be locked at any
time in order to prevent the settings being
changed e.g. by wiping over the panel with a
cloth.
Control panel
Display
Switch on
Touch
(for 5 seconds)
Switch off
Touch
previously set heat setting
When you switch the appliance off, the
locking function is automatically switch-
ed off.
Using the child safety device
The child safety device prevents unintention-
al use of the appliance.
Switching on the child safety device
Step
Control panel
Display/Signal
1.
Switch on appliance. Do not set a heat setting.
2.
Touch
for 4 seconds
The child safety device is switched on.
Switching off the child safety device
Step
Control panel
Display/Signal
1.
Switch on appliance. Do not set a heat setting.
2.
Touch
for 4 seconds
lights up
3.
Switch appliance off.
The child safety device is switched off.
The child safety device can only be
switched on and off if no heat setting is
set.
Overriding the child safety device
The child safety device can be switched off
in this way for a single cooking session; it re-
mains activated afterwards.
Step
Control panel
Display/Signal
1.
Switch appliance on
2.
Touch
for 4 seconds
lights up
Until the appliance is next switched off, it can used as normal. After switching off the appliance, the
child safety device is active again.
After overriding the child safety device, a
heat setting or a function must be set
within approx. 10 seconds, otherwise
the appliance automatically switches it-
self off.
progress
21
