Programma EGIL BM-19070, User Manual, Page: 8 / 80

P r o g r a m m a E l e c t r i c A B
Z P - B M 0 1 E R 0 7 A
8
E G I L
1 Safety
1.2 Warnings
WARNING
• Always make certain that the DC
system in the substation is disconnected
before connecting Egil.
• Always ground Egil.
• Before connecting Egil, turn off its
master ON/OFF switch.
• Only connect Egil to an outlet pro-
tected with max 16 A overcurrent protec-
tion.
• Unplug Egil from the mains supply
when it is left unattended or not in use.
• Do not attempt to service Egil yourself.
Opening or removing covers may expose
you to dangerous voltage. If you attempt
to service Egil yourself the warranty is no
longer valid.
• Do not use any accessories that are
not intended for use together with Egil.
• Unplug Egil from the wall outlet before
cleaning. Use a damp cloth for cleaning.
Do not use liquid cleaners or aerosol
cleaners.
CAUTION
• Use only approved mains detachable
cable set with Egil. Main supply cables
shall be rated for the maximum current
for the equipment and the cable shall
meet the requirements of IEC 60227 or
IEC 60245. Mains supply cables certi-
fied or approved by a recognized testing
authority are regarded as meeting this
requirement.
• Polarity on AUX 1&2 must be red to +
and black to -.
• Refer all servicing to qualified service
personnel.
• If you need to return Egil, please use
either the original crate or one of equiva-
lent strength.
1.1 General
IMPORTANT
• Read the manual and comply with the
following instructions before using Egil.
• Always comply with local safety regula-
tions.
Symbols on the instrument
Caution, refer to accompanying
documents
Protective connector terminal