Programma EGIL BM-19070, User Manual, Page: 66 / 80

P r o g r a m m a E l e c t r i c A B
Z P - B M 0 1 E R 0 7 A
6 6
E G I L
11 Calibration
11.1 Coil current
measurement
Confirm that you want to continue calibrating the current
scale.
Adjust Current
<Yes> No
Note! Only qualified personnel should perform
the calibration function.
Egil as an Ampere meter
1. Connect a stabilized DC current source with
a calibrated ampere meter in series to the
close coil input and output.
2. Turn the OPERATE or MEASURE knob to
close the contacts.
3. Adjust the current to around 5A. Note: If
the test current is too low, the display will
indicate “out of range!”
Test Current
xx A
4. Press ENTER to continue.
Loading the precise current
value
1. Enter the correct current value that was
generated during the calibration procedure,
red out from the ampere meter.
Source Current
xx A
2. Press ENTER to finish the current calibra-
tion.
Note! During the calibration most of the keys
and knobs are disabled.
You can calibrate Egil by adjusting the current and the
voltage measurement. The zero adjustment is made
automatically at the start-up of Egil. The scale adjustment
is defined as described below.
Note! Only qualified personnel should perform
the calibration function.
Select CALIBRATION in the MAIN menu:
MAIN MENU
< Calibration >