Programma EGIL BM-19070, User Manual, Page: 54 / 80

P r o g r a m m a E l e c t r i c A B
Z P - B M 0 1 E R 0 7 A
5 4
E G I L
8 How to make a motion
measurement
(option)
Option - >
For control panel references, see Chapter 5 (Control
panel).
IMPORTANT
• Read the chapter “Safety” before
using Egil.
• Always comply with local safety regula-
tions.
WARNING
• Do not short-circuit or touch the
auxiliary voltage. Use of “touch-proof”
connectors is recommended.
• Both breaker sides must be grounded
when making connections to the
breaker.
• Always disconnect the breaker control
circuit from Egil control output, before
doing any work on the breaker.
• To avoid unintentional breaker opera-
tions while working on the breaker,
connect the breaker control circuit to Egil
blind terminals (13 and 14) as illustrated
below.
close coil
trip coil
EGIL
Programma
+
IMPORTANT
If only one side of the breaker is
grounded while making the test, special
precautions must be observed to protect
service personnel and the test equip-
ment from harmful voltages.