Programma EGIL BM-19070, User Manual, Page: 57 / 80

P r o g r a m m a E l e c t r i c A B
Z P - B M 0 1 D R 0 7 A
5 7
E G I L
8.3 Running a
measurement
Running a single close (C)
or open (O) operation.
1. Connect the breaker as shown in section
8.1 above.
2. Run a breaker operation without measure-
ment by turning the OPERATE knob. This
tests the connection. Run the operation
with measurement by turning the MEASURE
knob.
Running an Open-Close-
Open (O-C-O) operation.
1. Connect the breaker as shown in section
8.1 above.
2. Select O-C-O (open-close-open) operation in
the SEQUENCE menu by using the arrow
keys.
3. Press ENTER to set the close and open
delay values. The default value is 300 ms
(0.30 s) for close pulse delay and 10 ms
(0.01 s) for opening pulse delay. Press
ENTER to continue.
4. Set the pulse length values if needed.
Press ENTER to confirm your settings.
5. Run a breaker operation without measure-
ment by turning the OPERATE knob. This
tests the connection. Run the operation
with measurement by turning the MEASURE
knob.
Note: The first measurement must be a single
close or open operation.
8.4 Reading the
printouts
For more information about the printer, see Chapter 12
(The printer).
The first part of the printout shows administrative data
and test conditions.
The second part of the printout shows the result in nu-
meric and graphic form.
You can also view the results on the display if you activate
the DISPLAY option on the MAIN menu.
Option - End