Programma EGIL BM-19070, User Manual, Page: 6 / 80

P r o g r a m m a E l e c t r i c A B
Z P - B M 0 1 E R 0 7 A
6
E G I L
About this manual
Options
Option - >
All options in this manual start with lines as above and
stop with lines as below.
Option - End
Chapters that you must read
thoroughly
Chapter 1 (Safety), which presents information about the
safety precautions that must be taken when using Egil in
different types of situations.
Getting started
Chapter 2 (Quick instructions) is a quick guide to prepare
Egil for time measurement or motion measurement
(option) and to change measurement parameters or to run
a measurement.
Egil’s components
Chapter 3 (System components) contains a list of the
components that are included in Egil and the accessories
that can be ordered.
Chapter 4 (Description of Egil) presents an overview of
the different control panel blocks.
Chapter 5 (Control panel) presents the control panel in
detail.
Choosing menus and setting
parameters
Chapter 6 (Menu options and parameter settings) presents
the menu options and the parameter settings which you
can make in the different menu headings.
Complete test procedures
Chapter 7 (How to make a time measurement) and chapter
8 (How to make a motion measurement) describes how
you make different types of measurements with Egil.
Printing results
Chapter 12 (The printer) describes the different parts of
the printout and how to change paper in the printer.
Troubleshooting
Chapter 10 (Troubleshooting) presents many of the most
frequently encountered errors made by users and explains
how to fix them. The error messages that are shown in the
display window are also explained here.
Calibration
Chapter 11 (Calibration) explains how to calibrate Egil.