Fig. 48: Tighten process connection
(outlet)
10.
Using a proper sized fixed
spanner, tighten the process
connection (outlet). Hold the
device body in place using a
suitable fixed spanner (Fig. 48),
and observe the proper torque
(
Ä
Chapter 11.1 “Tightening
torque” on page 76
).
Fig. 49: Check for smooth operation
11.
Check the float for ease of
movement (Fig. 49) by applying
light pressure with the test rod
ð
If the float moves sluggishly,
disassemble the device
Ä
Chapter 9.2 “Disas-
sembly” on page 65
and
clean the float and device
body bore
If the float is still slug-
gish after having been
cleaned several times,
contact the manufac-
turer.
Maintenance
Maintenance > Assembly
27.04.2015
61
Summary of Contents for SW-01
Page 69: ...Fig 59 Type SW 04 3 4 Technical data Dimension sheet 27 04 2015 69...
Page 70: ...Fig 60 Typ SW 04 1 Technical data Dimension sheet 27 04 2015 70...
Page 153: ...Fig 60 Type SW 04 3 4 Technical data Dimension sheet 18 03 2015 70...
Page 154: ...Fig 61 Type SW 04 1 Technical data Dimension sheet 18 03 2015 71...
