Profimess SW-01, Operating Instructions Manual

Page: 122 / 167

Fig. 22: Loosen inner section
3. Remove the inner section from
the socket by inserting a flat-
bladed screwdriver into the slot
(Fig. 22/1) and carefully pry out
the inner section.
Fig. 23: Loosen the screw connection
4. Unscrew the screw connection
(Fig. 23/1) by turning in the
direction of the arrow
5. Guide the connecting cable
through the screw connection in
the socket
6. Make the connections as shown
in the connecting diagram
(Fig. 24 und Fig. 25)
7. Place the inner section (Fig. 22)
back into the socket and push
until it locks on
8. Retighten the screw connection
(Fig. 23/1) by turning it to the
right until tight
Installation and initial startup
Plug connection
18.03.2015 39