Protective gloves protect the hands
from friction, burns, grazing, abrasion,
surface cuts or deeper injuries, as well
as from direct contact with hot or cold
surfaces.
With hazardous media, the protec-
tive equipment specified in the
Safety Data Sheet of the medium
must be worn. In addition, the speci-
fications of the system operator
must be followed. If no protective
equipment is specified, suitable pro-
tective gloves and goggles must be
worn.
The protective equipment is used to
protect against hazardous media leaks
and hazardous media residue in the
device.
2.6 Protective systems
Integration within an emergency-
stop concept is required
The device is designed for use as a
part of a machine or system. It does
not have its own controller and does
not have an autonomous emergency-
stop function.
Before starting up the device, install
the emergency-stop equipment and
incorporate it into the safety chain of
the machine or system.
Connect the emergency-stop equip-
ment so that if there is an interruption
in the power supply or in the activation
of the power supply after an interrup-
tion, dangerous situations are excluded
for persons and valuables.
The emergency-stop equipment must
always be freely accessible.
2.7 Replacement parts
WARNING!
Risk of injury due to use of
incorrect spare parts!
Use of incorrect or faulty spare
parts may result in dangers to per-
sonnel as well as damages, mal-
functions or total failure.
–
Only use original spare parts
from the manufacturer or
approved by the manufacturer.
–
Always contact the manufac-
turer in case of doubt.
Safety
Replacement parts
27.04.2015
16
Summary of Contents for SW-01
Page 69: ...Fig 59 Type SW 04 3 4 Technical data Dimension sheet 27 04 2015 69...
Page 70: ...Fig 60 Typ SW 04 1 Technical data Dimension sheet 27 04 2015 70...
Page 153: ...Fig 60 Type SW 04 3 4 Technical data Dimension sheet 18 03 2015 70...
Page 154: ...Fig 61 Type SW 04 1 Technical data Dimension sheet 18 03 2015 71...