28
Press the Program button to quit from running, the relevant Program LED will go
out.
Mix Programs
Mix Programs
Mix Programs
Mix Programs
Pressing two or more Program buttons at a time allows you to mix programs. The
selected programs will run synchronously.
Running Programs With Speed Fader (or Tap Sync)
Running Programs With Speed Fader (or Tap Sync)
Running Programs With Speed Fader (or Tap Sync)
Running Programs With Speed Fader (or Tap Sync)
You can run the programs with preset programming speed or Speed Fader (Tap
Sync). The Program LED will blink briefly when it is running with Speed Fader (Tap
Sync), whereas the Program LED will blink at intervals when it is running with
preset programming speed. Press and hold down the relevant Program button,
then press the Speed+Fade button to change running mode between Speed Fader
and preset Programming speed.
Running Programs With Fade Time
Running Programs With Fade Time
Running Programs With Fade Time
Running Programs With Fade Time
When the program is running with Speed Fader (Tap Sync), you can press the
Speed + Fade to enable or disable Fade Time function. When Fade Time is enabled,
the Speed fader will serve speed and fade time control. When Fade Time is
disabled, the Speed fader will serve Speed control only.
Audio Running
Audio Running
Audio Running
Audio Running
Press the Audio/Preview button, the relevant LED will be lit indicating Audio is
activated. In Audio mode, all selected programs will run with the beat of music
rhythms. Press the button again to quit Audio mode, its LED will go out
accordingly.
Manual Channel Fader & Reinstate Program
Manual Channel Fader & Reinstate Program
Manual Channel Fader & Reinstate Program
Manual Channel Fader & Reinstate Program
You can use channel faders to control the relevant fixtures at any time. There is no
exception when the program is running. If you want to recall the channel, you can
press the relevant Program button for one second to reinstate the program.
RESET MEMORY
This function allows you to dump memory. Switch the power off, next press and
hold down the Scene No. 2, Bank and Blackout buttons synchronously, then you
can switch the power on to reset memory. It will take you several seconds.
A caveat: Doing reset frequently will do harm to the memory.
Summary of Contents for PLBR8DJ
