PROEL PLBR8DJ, User Manual

Page: 18 / 32

18
CF cards CF cards CF cards CF cards
Memory card may become hot during use. Make sure the power is off when
removing or inserting memory cards. Use recommended 32 MB Compact Flash
Card only. The CF card should be exclusive and must not be shared by PC or other
devices.
Copyright Notice
Copyright Notice Copyright Notice Copyright Notice
No part of the manual included with this product may be reproduced, transmitted,
transcribed, stored in a retrieval system, or translated into any language in any
form, by any means, without authorized written permission.
SPECIFICATIONS
Model: PLBR8DJ
Power Requirement: DC 9-15V, 500mA min.
LED Screen: 4-digit segment display
DMX Channels: 64 DMX channels
Input/ Outputs: DMX Out:
3-pin Neutrik chassis connector
RS 232 port:
DB 9 connector
Fog Machine connector
5-pin DIN connector
USB connector for DJ work light
Audio Trigger: By built-in microphone
Dimensions (LxWxH): 360x193x74mm
Weight: Approximately 2.1 Kg
Accessories: AC/ DC Adaptor x1(included)
Scandisk 32 MB Compact Flash Card (optional)
5V/1W DJ work light (optional)
OVERVIEW
The PLBR8DJ is a 64 DMX channels intelligent lighting controller in response to up
to 8 fixtures of 8 DMX channels (plus Pan/Tilt movement) each. The PLBR8DJ allows
you to record 96 scenes and 4 programs, patch 8 DMX channel for the fixture(s),
freely have access to CF card for the exchange of data and mutually swap data
between two units.
REAR PANEL CONNECTIONS
Power input Power input Power input Power input
Socket
for an external 9V power supply. This requires a transformer with a 9VDC
output at 500ma.
Power switch Power switch Power switch Power switch
switching on or off the power.