25
Terminal is not installed on your version of Windows, install it from your Windows
CD. Go to the control panel, select Add/Remove Programs, select Windows Setup,
and then select Communication. Follow the instructions to complete the
installation. Once the Hyper Terminal Program is getting started, you will be asked
to choose a name and an icon. Name it PLBR8DJ then pick any icon then click OK.
Go to the next dialog box “Connect to” and choose “Direct to COM 2” . Ignore the
telephone number and other settings in this box then click OK. In the next dialog
box, set bits per second to 57600, data bits to 8, parity to none, stop bits to 1, flow
control to none, then click OK. You will access Hyper Terminal desktop.
Click File menu in the upper left corner of the desktop, then “Properties”, and then
select the “settings” tab. From the settings tab click “ASCII Setup”. In the next dialog
box, leave all settings deselect, then OK. Close Hyper Terminal and you will be
prompted to save this Hyper Terminal setup. Click YES to save it then you will have
a program labeled “PLBR8DJ.ht”. You may want to make a shortcut on your desktop
if you plant o use your PC with PLBR8DJ often. From this point on, whenever
necessary, you can just click PLBR8DJ.ht icon to invoke the PLBR8DJ Hyper Terminal
configuration quickly.
1. Connect to your PC as described hereinbefore.
2. Call the version of Hyper Terminal that you created for PLBR8DJ.
3. Click on the top menu bar and select “Send Text File”. A dialogue box will appear
allowing you to select the text file we provided (we will provide you the higher
version software in Text type file).
4. Find the drive and folder where the file is located, select the file and click on
“OPEN”.
5. When Hyper Terminal is transmitting the file, the message “Rece’ (receive) will
twinkle in the LED
Screen of the console and the Record LED will be lit.
6. The message “good” will appear in the LED Screen and the Record LED will go
out when the process is completed successfully. If failure occurs, the message “Err”
will appear and the Record LED will go out. Please check the connections and
configurations and try it again.
7. If the software is lost as a result of failure, you don’t have to worry about it at all,
there is a shortcut to Software Update. With the power off, press Fixture buttons 1-
4 at a time. Switch the power on while holding down these four Fixture buttons,
then you will have access to Software Update to re-try it again.
8. A final caveat: No power outage is allowed during receiving.
4.2. Data Upload
4.2. Data Upload
4.2. Data Upload
4.2. Data Upload
In RS 232 menu, press
∧∧∧∧
/
∨∨∨∨
button to scroll to “2: UPr” readout, then press the
Record button to access Data Upload. Similarly, there are 7 data types for Data
Upload options, including All (ALL), Scenes (SCEN), Program 1 (Pr01), Program 2
(Pr02), Program 3 (Pr03), Program 4 (Pr04) and Set (Set).
Summary of Contents for PLBR8DJ
