23
2.2. Blackout Delay
2.2. Blackout Delay
2.2. Blackout Delay
2.2. Blackout Delay
In Setup menu, press
∧∧∧∧
/
∨∨∨∨
button to scroll to “2: blt” readout. Press the Record
button, the LED
Screen will show the current Blackout setting.
1. Press
∧∧∧∧
/
∨∨∨∨
button to select between zero to 10 seconds for Blackout delay.
2. Press Record button for three seconds to quit from Record mode, the relevant
Record LED will go out.
3. Pressing Blackout button for one second can bypass Blackout delay.
2.3. Display Shift between 100/ 255
2.3. Display Shift between 100/ 255
2.3. Display Shift between 100/ 255
2.3. Display Shift between 100/ 255
In Setup menu, press
∧∧∧∧
/
∨∨∨∨
button to scroll to “3: dis” readout. Press the Record
button, the LED Screen will show the current display mode.
1. Press
∧∧∧∧
/
∨∨∨∨
button to select between 100 and 255.
2. Press Record button for three seconds to quit from Record mode, the relevant
Record LED will go out.
3. CF Card Menu
3. CF Card Menu
3. CF Card Menu
3. CF Card Menu
Press Record buttons for three seconds until the Record LED is lit. Press
∧∧∧∧
/
∨∨∨∨
button
to scroll to “3: CF” readout, then press the Record button to access CF Card menu.
There are 7 data types in the CF Card menu, including All (ALL), Scenes (SCEN),
Program 1 (Pr01), Program 2 (Pr02), Program 3 (Pr03), Program 4 (Pr04) and Set
(Set) which can greatly help data exchange and backup.
In CF Card menu, you may have access to Write (“1: St”) or Read (“2: rd”) menu using
∧∧∧∧
/
∨∨∨∨
button.
Please refer to under-mentioned for further instruction.
3.1. Write Me
3.1. Write Me
3.1. Write Me
3.1. Write Menu
nu
nu
nu
In CF Card menu, press
∧∧∧∧
/
∨∨∨∨
button to scroll to “1: St” readout, then press the
Record button to access Write menu.
1. In Write menu, press
∧∧∧∧
/
∨∨∨∨
button to select desired data type you wish to write
into the CF Card.
2. Press Record button, the data location message will appear in the LED Screen.
3. Press
∧∧∧∧
/
∨∨∨∨
button to select desired location between 01-99.
4. Press Record button, the message “Stor” will twinkle in the LED Screen, which
indicates it is writing.
5. The message “good” will appear in the LED Screen when this process is
completed successfully.
Summary of Contents for PLBR8DJ
