PROEL PLBR8DJ, User Manual

Page: 19 / 32

19
DMX 512 output using a 3 DMX 512 output using a 3 DMX 512 output using a 3 DMX 512 output using a 3----pin XLR connector pin XLR connector pin XLR connector pin XLR connector
There is a polarity switch that swaps pins 2 and 3.
Some lighting fixtures receive data minus on pin 2 and some on pin 3. The more
commonly used
polarity is data minus on pin 2 (switch is to the right as you’re looking at the back
of the unit).
9999----pin RS pin RS pin RS pin RS----232 connector 232 connector 232 connector 232 connector
The RS-232 port can be used to connect to a personal computer in
order to do memory backups and software updates.
CF Card Slot
CF Card Slot CF Card Slot
CF Card Slot
Insert or unload CF card that allows you to back up the memory using 32 MB
Compact Flash cards.
Fog Machine connector Fog Machine connector Fog Machine connector Fog Machine connector
Used for connection to a Fog Machine.
FRONT PANEL CONTROLS
Fixture Buttons Fixture Buttons Fixture Buttons Fixture Buttons
There are 4 Fixture buttons in a row. The Bank button allows changing between 1-4
fixtures and 5-8 fixtures. A tap of any of these fixture buttons allows you to enable
the fixture. The relative LED blinks when the fixture is activated. When the Group
button is pressed, several fixtures can be selected at a time, as a result the relative
LEDs blink synchronously.
Scene Buttons
Scene Buttons Scene Buttons Scene Buttons
There are 4 Scene buttons in a row. As there are 24 pages, total 96 scenes are
available. The relative scene LED is lit indicating the recorded scene is available. To
call the recorded scenes, just tap the relative buttons.
Channel Faders
Channel Faders Channel Faders
Channel Faders
There are 4 Faders in a row. The Page button allows changing between 1-4 and 5-8
channels. These faders are used to manual control the relative fixture channels.
Speed Fader
Speed Fader Speed Fader
Speed Fader
This allows you adjust the running speed of programs. It ranges from 0.05 second
to 10 minutes.
When Speed+Fade button is enabled (lit LED), it can control Fade time as well as
Speed.
Record Button
Record Button Record Button Record Button
Pressing this button for 3 seconds enables Record mode, as is implied by the lit
LED. Pressing for 3 seconds again disables Record mode, as a result the LED goes
out.
Audio/Preview Button
Audio/Preview Button Audio/Preview Button
Audio/Preview Button
This button is used to enable Audio mode, as is implied by the lit LED.