21
3. Select the destination page using
∧∧∧∧
/
∨∨∨∨
button.
4. Press Record and destination Scene buttons at a time, all LEDs will give a brief
flash indicating you’ve created a scene successfully, in the meantime, the relevant
Scene LED will be lit.
5. Press Record button for three seconds to quit from Record mode, the Record LED
will go out.
1.2. Deletion of Scenes
1.2. Deletion of Scenes
1.2. Deletion of Scenes
1.2. Deletion of Scenes
To delete scenes, please follow undermentioned procedures:
1. Be sure you are in Record mode. Select the destination page using
∧∧∧∧
/
∨∨∨∨
button.
2. Press Delete and destination Scene buttons at a time, all LEDs will give a brief
flash indicating you’ve deleted a scene successfully, in the meantime, the relevant
Scene LED will go out.
3. Press Record button for three seconds to quit from Record mode, the Record LED
will go out.
1111.3. Recording Programs
.3. Recording Programs
.3. Recording Programs
.3. Recording Programs
To record programs, please follow undermentioned procedures:
1. Be sure you are in Record mode. Select a program out of 4 Program buttons, the
Program LED will flash at intervals and the LED Screen will read “ st00 ” .
2. Call a recorded scene or create a new scene pursuant to the paragraph of 1.1.
3. Make adjustments of speed or fade time. To preview its effect, just press
Audio/Preview button.
4. Press Record button to save the current scene, all LEDs will give a brief flash
indicating you’ve inserted a scene successfully, in the meantime, the LED Screen
will read “ st01 ”.
Select the step number using
∧∧∧∧
/
∨∨∨∨
button, then you can write the current scene
into the current step.
5. Repeats steps 2-4 to record up to 99 steps into the program.
6. Press Record button for three seconds to quit from Record mode, the relevant
Record LED will go out.
1.4. Deletion
1.4. Deletion
1.4. Deletion
1.4. Deletion of Steps
of Steps
of Steps
of Steps
To delete steps, please follow undermentioned procedures:
1. Be sure you are in Record mode. Select a program out of 4 Program buttons, the
Program LED will flash at intervals and the LED Screen will read “ st00 ” .
2. Select the step as required using
∧∧∧∧
/
∨∨∨∨
button.
3. Press Delete button, all LEDs will give a brief flash indicating you’ve deleted the
step successfully, in the meantime, the LED Screen will read the earlier step.
4. Repeats steps 2-3 until all unnecessary steps have been deleted.
5. Press Record button for three seconds to quit from Record mode, the relevant
Record LED will go out.
Summary of Contents for PLBR8DJ
