PROEL PLBR8DJ, User Manual

Page: 20 / 32

20
Tap Sync Button Tap Sync Button Tap Sync Button Tap Sync Button
Repeatedly tapping this button establishes the running speed of programs.
Fog Machine Button
Fog Machine Button Fog Machine Button
Fog Machine Button
This button is used for Fog Machine operation.
Joystick
Joystick Joystick Joystick
This joystick controls Pan or Tilt movement of fixtures.
Program Buttons
Program Buttons Program Buttons Program Buttons
There are 4 program buttons in a column. These buttons are used to load or store
programs.
Black
Black Black Blackout Button out Button out Button out Button
Disable overall output when this button is enabled.
Delete Button
Delete Button Delete Button
Delete Button
This button can be used to delete scenes, steps or programs only in Record mode.
[[[[
∧∨ ∧∨ ∧∨ ∧∨
] ] ] ] Buttons
These two buttons can be used for plus or minus adjustments.
LED Screen
LED Screen LED Screen LED Screen
This LED Screen gives direct read-out of adjustments of parameters.
USB Connector
USB Connector USB Connector
USB Connector
This connector is used for gooseneck light (DJ work light).
THE MENU FIELD
Pressing Record button for three seconds allows you to have access to SET-UP
menu, in the
meantime, the Record LED is lit and the LED Screen reads “1: rec”. You may have
access to Record, Setup, CF card or RS 232 using
∧∧∧∧
/
∨∨∨∨
button. Please refer to under-
mentioned for further instruction.
1. Record Enable
1. Record Enable 1. Record Enable
1. Record Enable
Press Record button for three second until the Record LED is lit. Press
∧∧∧∧
/
∨∨∨∨
button
to scroll to “1: rec” readout, then press the Record button to access Record mode,
“rec” appearing in the LED Screen indicates Record is enabled.
In Record mode, you are allowed, as required, to record scenes, delete scenes,
record programs, and delete steps out of program or entire program.
1.1. Recording Scenes
1.1. Recording Scenes 1.1. Recording Scenes 1.1. Recording Scenes
You are presumed to have assigned the fixtures before recording. To record scenes,
please follow undermentioned procedures:
1. Be sure you are in Record mode. Select a fixture or a group of fixtures and make
an adjustment using relative channel faders.
2. Repeats step 1 to make adjustments of other fixtures.