7
Connect
There are three ways shown below to connect this player to your TV set. Please choose one to apply.
Basic connection:
Power Cord:
Connect the DC input in the device.
Audio cable output:
Connect the cables to TV set.
CVBS video output (NTSC or PAL):
Connect to TV set.
HDMI connection:
Power Cord:
Connect the DC input in the device.
HDMI output (Up to 1080p):
Connect to HDMI input of TV set. The HDMI port sends digital video
and audio signal through the cable. In this configuration, the audio output must be set
to LPCM 2CH. Please refer to the section of Audio setting.
*HDMI output to HDMI receiver:
Connect HDMI input to the HDMI receiver, and then connects
another HDMI cable from the receiver to TV set like PD-100N -> HDMI receiver ->
HDMI TV set. In this configuration, the multichannel audio can be enabled and
decoded by the HDMI receiver. Please set the audio output to HDMI RAW. Refer to the
section of Audio setting for further instruction.
SPDIF connection:
Either
Basic connection or HDMI connection can apply SPDIF connection. This connection provides
5.1 audio data to the SPDIF receiver, and then the receiver decodes it into 5.1 audio outputs.
TOSLINK cable:
Connect the optical cable from this port to the SPDIF input of the audio receiver.
When connecting SPDIF, the connection of AUDIO R/L isn’t required.
Multichannel audio setting:
To obtain the multichannel audio via SPDIF, setup the audio output to
SPDIF RAW.
Network connection:
Choose either Ethernet cable or USB Wi-Fi dongle for the network connection.
