12
resolution of LCD monitor. Only the supported resolution (white characters) can be selected.
1080P 24HZ:
Select “On” to enable this option. When this option is on, the player will output 1080p
24Hz video when the condition below is all fulfilled:
1. The video output of this player is HDMI.
2. The EDID (Extended Display Identification Data) sent by the TV set through HDMI indicated
the support of 1080p 24Hz display.
3. The frame rate of the video file is 23.976 fps or 24 fps.
Movie Preview:
Turn off this option to disable the preview of the movie file in the file browse
window.
Resume Play:
Turn off this option to disable this function. The default is enabled and the video
playback progress is saved when stop and can be continued next time.
3. Photo
Select this option to open the detail setting for the photo display.
Slide Show Timing
: Choose from these options “Off, 2 Seconds, 5 Seconds, 10 Seconds, 30
Seconds, 1 Minutes and 2 Minutes”. It decides the waiting time before changing
to the next photo while viewing photos.
Transition Effect
: Choose from these options “Off, Cross Fade, Left to Right, Top to Bottom, Waterfall,
Snake, Dissolve, Strip Left Down and All Effect Shuffle”. It decides the transition
effect for changing photos.
4. Audio
Select this option to open the detail setting for the audio playback. There are four kinds of digital
audio output, and can be roughly divided into two categories “HDMI” and “SPDIF”. For the HDMI, it is
recommended to connect HDMI output to HDMI receiver or TV set. For the SPDIF Only, it is
recommended to connect SPDIF receiver.
HDMI LPCM (2CH):
When connecting the HDMI to TV set directly, select this option for the correct
audio. The player transcodes the Multi-channel audio data into stereo digitized analog
audio (Linear pulse code modulation) and output through HDMI port.
HDMI RAW:
When connecting to the HDMI receiver, select this option for the
multichannel
audio.
The player bypasses the digital audio such as Dolby Digital AC3 or DTS through HDMI
port. Please be aware of that the additional HDMI receiver is required to decode and
output the digital audio.
SPDIF LPCM (2CH):
When connecting to the SPDIF receiver, select this option to output the digitized
analog audio (LPCM) audio.
SPDIF RAW:
Select this option for the
multichannel
audio. The RAW data of audio such as DD AC3
or DTS will be sent through SPDIF to the receiver which decodes the digital audio data.
Note:
For HDMI TV set + HDMI receiver: Select HDMI LPCM (2CH) or HDMI RAW.
For HDMI TV set + SPDIF receiver: Select SPDIF LPCM (2CH) or SPDIF RAW.
For HDMI TV set only: Select “HDMI LPCM (2CH)” for the correct sound.
*: Because TV set receives 2CH LPCM audio only and short of digital audio decoding
