49
message, please use the free PC software “MediaInfo” to check the video codec with the codec table
in the manual. If it is not in the table then the player can’t support it. Pease visit the URL to download
the software
http://mediainfo.sourceforge.net/
.
Can’t playback the audio in the Movie
If you don’t hear the audio while playing the Movie, it could be a DTS audio track and the player is
an un-licensed model. Try pressing “Green” key on the RCU to switch to the other sound track like
AC3 while playing the audio.
The second point is to check the audio setting. Choose the correct setting according to your
device. Please refer to the audio setting pages in this manual.
Connect DVI to HDMI converter
When using the DVI to HDMI converter to connect the player, some LCD monitors could only
accept the SD video. This player detects the support format of the LCD player and locks the HD option
if the monitor doesn’t support it. In this case, the player output SD video to the monitor.
Smooth playback through Ethernet/Wireless LAN
For the Ethernet connection, check if use at least 10/100 Mbps Ethernet switching Hub and the
10/100 Ethernet adapter on PC.
For Wi-Fi Dongle, we recommend using Infrastructure (AP) mode and “NO” or
“WPA/WPA2-PSK_AES” for the maximum data rate. In the other mode such as encrypted with WEP,
TKIP algorithm, or use Ad Hoc as the radio mode, the data rate is only up to 54 Mbps (802.11 g).
TV Overscan issue
Some video can’t be watched as full frame on TV set. The edges on the both sides may be
outside the TV screen. In such case, press the Zoom “-” key to zoom out the video to fit the screen.
