11
System Info:
It displays the firmware version including system version, audio-firmware version
video-firmware version and the TV system of this device.
2. Video
Select this option to open the detail setting for video display.
Aspect Ratio:
Select one among these options “Pan Scan 4:3, Letter Box 4:3, 16:9”.
Pan Scan 4:3:
Select for a full-height picture with both sides cut.
Letter Box 4:3:
Select for the “wide screen” display with black bands on the upper and lower parts
of the TV screen.
16:9:
Select this for a wide screen 16:9 TV.
Note:
When the movie is in wide screen 2.40:1, the both sides of the video is still cropped. Press
“Zoom -” to zoom out the video to fit the screen.
TV System:
Select the resolution for the TV picture. This page is the same as the one in the initial
setup.
Entering this page and you can see the available resolution. Choose one to change the resolution.
The possible resolution for each TV system is listed below. Select the right resolution according to
the capability of your TV set.
TV System & Resolution Standard Definition
High Definition
NTSC
NTSC, 480p
720p@60Hz, 1080i@60Hz, 1080p@60Hz
PAL
PAL, 576p
720p@50Hz, 1080i@50Hz, 1080p@50Hz
Only HDMI connection can output HD TV picture. Refer to the details below.
HDMI Connection:
When the HDMI is connected, this device can detect the available resolution of
TV set. After entering the video setup page, the available resolution will be
shown in white character and the negative one will be in dark character.
HDMI Auto
: When HDMI is connected, you can choose this option to use the maximum resolution
of TV set. If it is in dark character and can’t be selected, re-plug the HDMI cable and
re-enter this page to try again.
CVBS:
The SD video will always output from this port no matter what resolution you selected.
Note:
When connecting LCD monitor via DVI to HDMI converter, the player will detect the support
