Page 32
9
Quickstart menu
Quickstart menu opens by touching the symbol
.
Various functions can be accessed by pressing the
respective icons, described below.
The camera is an option at extra cost and this icon is only shown if
purchased. Press the icon to see a preview of the picture you would
get at a measurement. Pictures can be taken with or without zoom.
For further information refer to chapter 10.1 on page 33.
In the menu different settings can be made. For more information on
this please refer to chapter 13
The button Navi is shown if at least one of the options at extra costs
compass and level meter or GNSS GPS-unit had been aquiered.
Press the icon to get some information about the current positioning of
Zehntner ZRM 6010. For further information refer to chapter 10.2 on
page 35 or to chapter 11.3 on page 39.
All stored measurements are located in the archive (memory). Here
you can edit, delete, export to USB flash drive as well as to print out
measurement results. For further information refer to chapter 11
“Archive” on page 38.
Here you can print the last measurement or a specific measurement
marked earlier in the measuring mode display using the optional built-
in thermal printer or an USB printer such as our optional portable
printer. If no measurement is selected, the latest one will be printed.
The settings of the informations to be printed on the measuring report can be
configured, as described in chapter 13.6.11
“Options” on page 55.
Here you can calibrate the night visibility (R
L
) and change the
calibration settings. For further information refer to chapter 7
“Calibrate” as from page 18.
