Page 40
11.4 Input of additional information
Below the measurement data, additional
information such as Location, Street etc. can
be added or changed.
To edit a value, tap the entry and press
“Edit”, then enter the new value and confirm.
11.5 Printing of a measuring report
Select a printer by pressing the symbol
The optional built-in thermal printer or an
external printer connected to the USB-
interface can be used. The measuring report
can be printed out by selecting the desired
printer the measuring report will be printed
out. To choose the information to be printed
on the measuring report, please refer to
chapter 13.6.8
“Printer” on page 54.
11.6 Storing the measuring data on a USB mass storage device
Connect a USB drive to the USB interface (host). By pressing the button
all
measuring entries will be stored on the USB drive. The exported measurements can
be opened on a PC using the software “MappingTools”. For further information,
refer to the separate “MappingTools” instruction manual.
12 Data export a
nd “MappingTools” software
12.1 Interfaces
The Zehntner ZRM 6010 is equipped with the
following interfaces for data export:
•
Host USB interface (type A) for external units
such as USB drive or keyboard
•
Client USB interface (type B mini) for
connecting to a PC