Page 60
16.4 Error message
– “Factory calibration has expired”
Press the warning triangle and afterwards the
advice “Factory calibration has expired” to
get a more detailed explanation.
The instrument has been calibrated in
the factory 2 years ago. It should be
sent back to the manufacturer for
checking, calibration and certification.
Contact Proceq or your authorized
Proceq agent for returning the unit.
16.5 Error message
– “Camera failed, please retry”
•
Press the button
.
•
If the camera still failed, restart the
instrument as described in chapter 5
“Setting up” on page 17.
16.6 Reset of the Zehntner ZRM 6010
If the firmware of the Zehntner ZRM 6010 has a hang-up, you can reset the
instrument by shutting of the instrument completely as described in chapter 5
“Setting up” on page 17.
