Page 23
8.3 Measure mode
For instructions on the correct positioning of the device on the road marking
please refer to chapter 8.4 and 8.5 as from page 26
For editing or deleting measurements please refer to chapter 8.3.5 on
page 25
For changing the settings of the measure mode, please refer to chapter 13.3
on page 46
8.3.1 Single measurements
To trigger a measurement press the
measuring button
. Active measurement
period is indicated by “-“ on the top line and
the symbol
in the top left corner.
After a successful reading the current
measurement values will be shown on the
top. Previous measurements are shown on
the following lines, with the most recent one
at the top.
8.3.2 Average measurements
Activate average reading by tapping the
symbol
. To trigger a measurement press
the measuring button
.
Single measurements are displayed with a
chronological sequence number.
The current average is displayed at the
bottom line.
