probst 52400043, Operating Instructions Manual

Page: 137 / 233

〈 〉
〈 〉
7
Reduction gear oil
1/2 reduction with automatic centrifugal clutch
Oil capacity:
Oil capacity:
1/6 reduction
2.
OIL LEVEL BOLT
UPPER LEVEL
DIPSTICK/FILLER CAP
DRAIN BOLT
FILLER BOLT
Check reduction gear oil level.
Fill with SG, SF rated engine oil, if necessary.
Remove the oil filler cap and wipe the dipstick clean.
Insert the dipstick into the filler neck but do not screw it in.
If the level is low, fill to the upper level mark with the same oil
recommended for the engine (see engine oil recommendations
on page
).
Install the oil level bolt and filler bolt. Tighten them securely.
Check the oil level; it should reach the edge of the oil level bolt
hole. If the oil level is low, remove the filler bolt, and add oil until
it starts to flow out the oil level bolt hole. Use the same oil
recommended for the engine (see engine oil recommendations
on page
).
Remove the oil level bolt.
1.
2.
3.
6
1.
2.
3.
6
0.50 (0.53 US qt , 0.44 Imp qt)
0.15 (0.16 US qt , 0.13 Imp qt)