probst 52400043, Operating Instructions Manual

Page: 109 / 233

Operating Instructions
SH 2500-UNI-B
Maintenance and care
27 / 32
V7 GB
Pos: 26 / 99 geräte spez. Module /PG2 Vakuum -Verl ege system e/S H UNI 2500 b/ Wartung S H uni 2500 b/S H... @ 0\mod177_2.doc @ 822 9 @ 1222222
10
Maintenance and care
Pos: 31.2 /07 Wart ung und Pflege /01 Wart ung/ Ü_Wart ung+T ext allg. (nur mecha n. Geräte) @ 0\mod27_2. doc @ 7123 @
10.1 Maintenance
To ensure the correct function, safety and service life of the device the following points must be executed in the
maintenance interval.
Used only original spare parts , otherwise the warranty expires.
All operations may only be made in unpressurised, electro less and closed state of the device!
Pos: 31.3 /07 Wartung und Pflege/01 Wartung/ Wartung ME CHANISCH @ 0\mod78_2. doc @ 7151 @
The device must be installed and maintained by qualified personnel such as mechanics and electricians only.
After each repair or maintenance job check the safety equipment as described in the "Safety" chapter.
MECHNICAL
SERVICE INTERVAL Maintenance work
First inspection after
25 operating hours
●
Control and tighten all screws and connections.
(The implementation is only allowed by an expert).
All 50 operating hours
●
Tighten all screws and connections (take care that the tightening torques according
to the property class of the screws are observed).
●
Che ck all joints, bolts, guidance’s and g ears for correct function, if necessary adjust or
replace it.
Minimum 1x per year
(at rough conditions shorten the
interval)
●
Check of all the suspension parts, bolts and straps. Check for corrosion and safety by
an expert.