Pro-face PS5000 Series, User Manual

Page: 96 / 148

Hardware Modifications
96
Cellular Module Description
The table shows technical data for the Cellular module:
Any excessive weight or stress on communication cables may disconnect the equipment.
GPRS Remote Access
GPRS communication implies:

The Cellular module is connected to the Internet via the GPRS network.

The remote PC or network is also connected to the Internet.
GPRS topologies can support:

NAT (network address translation) routing tables for transparent routing to Ethernet devices

security services such as IP address control or VPN tunnels for secured data exchange over the
Internet
The following figure shows remote access to the network of the Cellular module:
Features Values
General
Bus type
mini PCIe card revision 1.2
Connector 1 x RF antenna coaxial connectors
Power consumption 3.3...3.6 Vdc < 700 mA (HSPA connected mode)
Peak current 1.5 A
Communication
Protocol
UMTS/HSPA network: 800/850/900/1700/1900/2100 MHzEDGE/
GPRS/ GSM network: 850/ 900/ 1800/ 1900 MHz
Speed Downlink: 7.2 Mbit/s (HSDPA) / uplink: 5.76 Mbit/s (HSUPA)
Dimensions (l x w x h) 50.85 x 29.9 x 6.2 mm (2.0 x 1.17 x 0.24 in)
CAUTION
LOSS OF POWER

Ensure that communication connections do not place excessive stress on the communication
ports of the Industrial Personal Computer.

Securely attach communication cables to the panel or cabinet.

Use only D-Sub 9-pin cables with a locking system in good condition.
Failure to follow these instructions can result in injury or equipment damage.