Pro-face PS5000 Series, User Manual

Page: 47 / 148

PS5000 Series (Slim Panel Type Atom Model) User Manual
47
AC Power Supply Module Description and Installation
Overview
The AC power supply module can optionally be mounted on the Slim Panel to allow the Slim Panel
to be operated with 100...240 Vac.
This figure shows the AC power supply module:
1 AC power cord
2 Support
3 AC power supply
4 DC power cord
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH

Remove all power from the device before removing any covers or elements of the system, and
prior to installing or removing any accessories, hardware, or cables.

Unplug the power cable from both the Industrial Personal Computer and the power supply.

Always use a properly rated voltage sensing device to confirm power is off.

Replace and secure all covers or elements of the system before applying power to the unit.

Use only the specified voltage when operating the Industrial Personal Computer. The AC unit
is designed to use 100...240 Vac input.
Failure to follow these instructions will result in death or serious injury.
WARNING
EQUIPMENT DISCONNECTION OR UNINTENDED EQUIPMENT OPERATION

Ensure that power, communication, and accessory connections do not place excessive stress
on the ports. Consider the vibration in the environment.

Securely attach power, communication, and external accessory cables to the panel or cabinet.

Use only D-Sub 9-pin connector cables with a locking system in good condition.

Use only commercially available USB cables.
Failure to follow these instructions can result in death, serious injury, or equipment damage.
WARNING
RISK OF BURNS
Do not touch the surface of the heat sink during operation.
Failure to follow these instructions can result in death, serious injury, or equipment damage.