Pro-face PS5000 Series, User Manual

Page: 135 / 148

PS5000 Series (Slim Panel Type Atom Model) User Manual
135
Regular Cleaning and Maintenance
Introduction
Inspect the Slim Panel periodically to determine its general condition. For example:

Are all power cords and cables connected properly? Have any become loose?

Are all installation fasteners holding the unit securely?

Is the ambient temperature within the specified range?

Are there any scratches or traces of dirt on the installation gasket?
NOTE: HDD health must be regularly checked with system monitor according to the usage. HDD
is rotative media requiring to be changed regularly according to usage. Data on HDD must be
saved regularly.
The following sections describe maintenance procedures for the Slim Panel, which can be carried
out by a trained, qualified user.
During operation, the surface temperature of the heat sink may exceed 70 °C (158 °F).
Cleaning Solutions
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH

Remove all power from the device before removing any covers or elements of the system, and
prior to installing or removing any accessories, hardware, or cables.

Unplug the power cable from both the Industrial Personal Computer and the power supply.

Always use a properly rated voltage sensing device to confirm power is off.

Replace and secure all covers or elements of the system before applying power to the unit.

Use only the specified voltage when operating the Industrial Personal Computer. The AC unit
is designed to use 100...240 Vac input. The DC unit is designed to use 24 Vdc input. Always
check whether your device is AC or DC powered before applying power.
Failure to follow these instructions will result in death or serious injury.
WARNING
RISK OF BURNS
Do not touch the surface of the heat sink during operation.
Failure to follow these instructions can result in death, serious injury, or equipment damage.
CAUTION
HARMFUL CLEANING SOLUTIONS

Do not clean the unit or any component of the unit with paint thinner, organic solvents, or
strong acids.

Use only a mild soap or detergent that will not harm the poly carbonate material of the screen.
Failure to follow these instructions can result in injury or equipment damage.