Pro-face PS5000 Series, User Manual

Page: 74 / 148

Hardware Modifications
74
Optional Interface Installation
Introduction
Before installing or removing an interface module, shut down Windows in an orderly fashion and
remove all power from the device.
Optional Interface Module
The figure shows the optional interface parts:
1 2 x RS-232/422/485 interface module
2 4 x RS-232/422/485 interface module
3 DIO interface module
4 CANopen interface module
5 Profibus DP interface module
6 Ethernet interface module
7 Extension kit (PFXZPSADSSD2)
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH

Remove all power from the device before removing any covers or elements of the system, and
prior to installing or removing any accessories, hardware, or cables.

Unplug the power cable from both the Industrial Personal Computer and the power supply.

Always use a properly rated voltage sensing device to confirm power is off.

Replace and secure all covers or elements of the system before applying power to the unit.

Use only the specified voltage when operating the Industrial Personal Computer. The DC unit
is designed to use 24 Vdc input.
Failure to follow these instructions will result in death or serious injury.