Pro-face PS5000 Series, User Manual

Page: 33 / 148

PS5000 Series (Slim Panel Type Atom Model) User Manual
33
Installation
Vibration and Shocks
Take extra care with respect to vibration levels when installing or moving the Slim Panel. If you
move the Slim Panel while it is installed in a rack equipped with caster wheels, it may undergo
excessive shock and vibration.
Installation Gasket
The gasket is required to meet the protection ratings (IP••/NEMA 4X indoor) of the Slim Panel. It
provides additional protection from vibration.
NOTE: IP••/NEMA 4X indoor or Type 4 is not part of UL certification.
CAUTION
EXCESSIVE VIBRATION

Plan your installation activities so that shock and vibration tolerances in the unit are not
exceeded.

Ensure that the installation panel opening and thickness are within the specified tolerances.

Before mounting the Industrial Personal Computer into a cabinet or panel, ensure that the
installation gasket is in place. The installation gasket provides additional protection from
vibration.

Tighten the installation fasteners using a torque of 0.5 Nm (4.5 lb-in).
Failure to follow these instructions can result in injury or equipment damage.
CAUTION
LOSS OF SEAL

Inspect the gasket prior to installation or reinstallation, and periodically as required by your
operating environment.

Replace the complete Industrial Personal Computer if visible scratches, tears, dirt, or
excessive wear are noted during inspection.

Do not stretch the gasket unnecessarily or allow the gasket to contact the corners or edges of
the frame.

Ensure that the gasket is fully seated in the installation groove.

Install the Industrial Personal Computer into a panel that is flat and free of scratches or dents.

Tighten the installation fasteners using a torque of 0.5 Nm (4.5 lb-in).
Failure to follow these instructions can result in injury or equipment damage.