Pro-face PS5000 Series, User Manual

Page: 12 / 148

Important Information
12
FCC Radio Frequency Interference Statement for U.S.A.
FCC Radio Interference Information
This equipment has been tested and found to comply with the federal communications commission
(FCC) limits for a Class A digital device, according to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a commercial, industrial,
or business environment. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause or be subject to
interference with radio communications. To minimize the possibility of electromagnetic interference
in your application, observe the following two rules:

Install and operate the Industrial Personal Computer in such a manner that it does not radiate
sufficient electromagnetic energy to cause interference in nearby devices.

Install and test the Industrial Personal Computer to ensure that the electromagnetic energy
generated by nearby devices does not interfere with the Industrial Personal Computer's
operation.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate this product.
WARNING
ELECTROMAGNETIC / INTERFERENCE
Electromagnetic radiation may disrupt the Industrial Personal Computer's operations, leading to
unintended equipment operation. If electromagnetic interference is detected:

Increase the distance between the Industrial Personal Computer and the interfering
equipment.

Reorient the Industrial Personal Computer and the interfering equipment.

Reroute power and communication lines to the Industrial Personal Computer and the
interfering equipment.

Connect the Industrial Personal Computer and the interfering equipment to different power
supplies.

Always use shielded cables when connecting the Industrial Personal Computer to a peripheral
device or another computer.
Failure to follow these instructions can result in death, serious injury, or equipment damage.