Pro-face FP2650-T41, Installation Manual

Page: 8 / 19

4 Interfaces
„ „
„ „
„ Analog RGB Interface
Input Signal Type Analog RGB
Input Signal Characteristics
Image signal: analog RGB
Synchronous signal: TTL level, negative true or positive true
Scanning type: non-interlace
OSD Settings
(On Screen Display)
CONTRAST
BLACK LEVEL
H-POS
V-POS
H-SIZE
PHASE
BACKLIGHT
DEFAULT (ALL CLEAR)
Connector: Mini Dsub 15 pin male
Connector set screw: Inch type (4-40)
Analog RGB Cable: FP-CV02-45 (VGA standard)
(Manufactured by Digital Electronics Corporation of Japan)
If a cable other than the specified Analog RGB cable is used, FP unit
operation cannot be guaranteed due to the possibility of noise
interference.
‹ ‹
‹ ‹ ‹
Pin Assignments and Signal Names for Analog RGB
Pin
No.
Signal Name Condition Pin Location
1 Analog R R signal input
2 Analog G G signal input
3 Analog B B signal input
4 Reserved NC (spare for input)
5 Digital grounding Digital signal GND
6 Return R
R signal GND
7 Return G G signal GND
8 Return B B signal GND
9 Reserved NC (spare for input)
10 Digital grounding Digital signal GND
11 Reserved
NC (spare for input)
12 Reserved NC (spare for input)
13 H. SYNC Horizontal synchronous signal input
14 V. SYNC Vertical synchronous signal input
15 Reserved NC (spare for input)
11
15
1
5