Pro-face FP2650-T41, Installation Manual

Page: 15 / 19

Function
CONTRAST
Adjusts the contrast. (Analog RGB only)
*1
BLACK LEVEL
Adjusts the color brightness. (Analog RGB only)
*1
H-POS Adjusts the horizontal position of the screen.
V-POS Adjusts the vertical position of the screen.
H-SIZE
Adjusts the screen size in the horizontal direction. (Analog RGB only)
*1
PHASE
Adjusts the input signal and the dot clock position. (32 levels)
(Analog RGB only)
*1
BACKLIGHT Adjusts the backlight brightness. (9 levels)
AUTO GAIN CONTROL
Automatically adjusts the contrast and the brightness.
(Analog RGB only)
*1
DISPLAY MODE Displays the resolution of the input image data.
OSD CLEAR (RESET) Resets the current OSD value to the default value.
OSD SAVE Save the current value and quit the OSD.
SYSTEM Changes settings such as activating the click sound.
ESCAPE
Cancels the setting and returns to the upper level. In the main menu,
this command closes the OSD.
Item
*1 When using DVI-D, the message "DO NOT NEED SETUP FOR DVI-D" is displayed and
no settings are required.
„ „
„ „ „
OSD Features
Use the FP unit's touch panel and the OSD (On Screen Display) menu to set the FP
screen settings, and fine-tune your screen's display. You can enter these settings even
while the FP si operating.
The following table explains each OSD setting item and its function.
„ „
„ „ „ Starting the OSD
To start the OSD and enter OSD mode, touch the touch panel's corners in the following
order : (1) upper left (2) upper right (3) lower right, all within 5 seconds. In OSD mode, the
setting screen will appear in the center of the screen. Until OSD setup is completed the
touch panel cannot be used to export data to external devices.
Main Menu
" " : OSD version.
9 Screen Display Adjustment