Pro-face FP2650-T41, Installation Manual

Page: 3 / 19

FP2650-T41 unit is UL/c-UL(CSA) qualified product (UL File No. E171486).
FP2650-T41 (UL Registration Model No.:3384101-01)
The FP conforms to the following standards:
„ „
„ „
„ UL60950-1 First Edition
(Information Technology Equipment - Safety - Part 1: General Requirements)
„ „
„ „ „ CAN/CSA-C22.2 No.60950-1-03
(c-UL Qualification)
(Information Technology Equipment - Safety - Part 1: General Requirements)
<Cautions>
Be aware of the following items when applying for UL/CSA about the end-use product which the FP is
built into.
•
The FP unit's rear face is not approved as an enclosure. When building the FP unit into an end-use
product, be sure to use an enclosure that satisfies required standards as the end-use product's overall
enclosure.
•
The FP unit must be used indoors only.
•
This unit should be installed in the front face of a metal panel.
•
If the FP unit is installed so as to cool itself naturally, be sure to install it in a vertical panel. Also, be
sure that the FP unit is installed at least 100 mm away from any adjacent structures or machine
parts. If these conditions are not met, the heat generated by the FP unit's internal components may
cause the unit to fail to meet UL standard.
• The end-use product, the FP is built into, should be examined about compatibility of combination
with the FP by UL.
UL/c-UL/CSA Application Notes
The FP2650-T41 unit is a CE marked product that conforms to EMC directives.
<Complies with the following Standards>
• Safety
EN60950-1
• EMI
EN55011 (Group 1, Class A)
• EMS <EN61000-6-2>
EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-11
If the following requirements are not met, the FP may fail to meet EN60950-1 standard require-
ments.
• The FP must be used as a built-in component of an end-use product.
• The FP unit must be used indoors only.
• When using the FP in an end-use product, be sure to install the FP unit’s power cut-off switch
where the operator can easily reach it. Use the switch that is appropriate for the current and
voltage used.
• The end-use product, the FP is built into, shoud be used with a UL60950-1 compatible structure.
CE Marking Notes